Monthly Archives: January 2024

So That’s Why It Rattled . . .

Not much happened at work today, or at home, for that matter. I did find this when I unboxed a new machine to check it out before we shipped it to a customer. And when I pulled it out of the box, it rattled.

And this is what I found when opened it up.

It’s one of the screws that holds the circuit board to the front panel, but all 3 of those are there. So this was just an extra one that was left over.

Apparently though, it didn’t hurt the machine, since it was fine when I checked it out.

Tomorrow Jan has a blood draw at Quest Labs for some of her yearly tests, then it’s on down to Snooze for lunch. Next up is Wal-Mart for some Wal-Mart stuff, wrapping with haircuts for both of us.


Thought for the Day:

What if I can’t trust the voices in my head?
Who am I supposed to listen to now?

And Now On To Today’s Retro-Blogs.™


January 19, 2011

Welcome To Texas . . .

Well, guess what?

This is what the Weather Channel calls ‘Mostly Sunny”.

Told you they lie.

Dark Sky

But at least it was dry enough to finish installing the three wheel well flanges.

This is what I started with —

Wheel Well 4

And this is how they looked when I was finished.

New Flanges

The last one, on the driver’s rear, went on with no problems whatsoever. However the first two, on the passenger side, were more problematic.

The problem was that the holes in the brackets mounted on the coach didn’t match up with the pre-drilled holes in the flanges. It almost looks like they were hand-fitted and drilled.

It would seem that they would have a jig to mount the brackets so they would match up with the holes already drilled in the flanges, but I guess not.

Flange Bracket 1

Flange Bracket 2

Michele Henry at Phoenix Commercial Paint did a fantastic job on the doors and the flanges last year in Elkhart. So if you’re in Elkhart, IN, and need anything from a touch-up to a full body paint job, Michele’s the one. In fact, even if you need a paint job and you’re not in Elkhart, it’s worth the trip.

The clouds finally went away just in time for the sun to go down. But I did get these photos of the two types of pelicans in the area. This is one of our local brown pelicans.

Pelican and Friends

And these are white pelicans. It’s the first time I’ve seen them this year. They look a little orangey, but that’s from the setting sun.

Now the sun comes out.

White Pelicans

On another note I had been looking for another hose splitter to replace my old one that cracked and started leaking. I like using one so I can keep two hoses hooked up, one to supply the coach and one for a hose and spray nozzle. But I never found one I really liked since they all restricted the water flow, cutting down on the water pressure in the coach.

Then I found this one at Home Depot and I really like it. It’s a Vigoro High Flow Dual On/Off Valve and it was just what I was looking for. If you need one, check it out.

Hose Divider

Nice!


January 19, 2012

I Love The Internet . . .

We’ve reached the point where you can find the answer to just about any question, as long as someone, somewhere, knows it.

For example, when Jan and I got our pills refilled recently, we each had one prescription that was filled with a different-looking pill than our previous refills. So, wanting to be sure that we got the correct prescriptions, my first thought was to make a trip back to Sam’s Club. My second thought to go to Google and type in “How to ID pills”

Turns out, there’s an App for that, or at least a website right here – Pill Identifier.

You just type in the 2 characters on one side and the 3 characters on the other like “IG 248”, and you have your answer, along with the manufacturer and any warnings.

And as it turns out, both of our prescriptions were correct.


I left the rig about 1pm for an afternoon of client stuff. My first stop was Fry’s Electronics to look for the new computer and LCD monitor we talked about yesterday. They had a nice deal on a Dell that looks pretty good, so my next stop was to my clients to get the OK, and also do some set up work.

Since one of the computers I’ll be replacing runs the UPS shipping software, I’ll have to double check what it will take to move the database over to the new computer.

I also started downloading the 425 MB file for the 2012 version of the UPS software which took about 30 minutes. I’m not sure yet whether I’ll upgrade the old computer to the 2012 version before moving the database to the new computer. I’ll call UPS Tech Support tomorrow and see what they suggest.

As I was finishing up, my client decided he wanted another monitor for one of the new computers I installed last week, so that makes two I’ll need.

Finally leaving the office, I stopped back by Fry’s to pick up about $1100 of a computer and monitors before heading back toward the rig.

On my way, I checked the Gas Buddy app on my Droid to find the cheapest nearby gas. Found a place right down the road for $3.15 which was a pretty good price. Then leaving the gas station I called ahead to Monterey’s Little Mexico for a pickup order of Tortilla Soup, Queso, and Chips to take home for supper. Sure does seem like we eat here a lot, doesn’t it?

On another note, while I was walking thru Fry’s I noticed a toy called “Geneactor”, some sort of action figure. That kind of rang a bell, but I just couldn’t place it. But on the way home, it hit me.

It reminded me of my very first computer, the Geniac. A little Googling and I found this. (Did I mention I love the Internet?)

geniac

It was a mechanical analog computer that I got for Christmas 1958 when I was 10 years old. It was made of a Masonite board and 6 Masonite wheels, along with a lot of wires, switches, and lights. I spent hours building and programming it, even writing my own programs, which on the Geniac, meant moving wires around.

But it started me on my career path. A year later  I had my ham radio license, and six years after that I was programming on a building-sized IBM 360 at Vanderbilt University using Fortran II and punch cards. I’m not sure that punch cards were all that big a step up from moving wires around, but the 360 certainly looked a lot cooler anyway.


January 19, 2013

Cheesecake and Hello Kitty . . .

We didn’t do much this morning, but it sure was nice.

After our morning walk, we just sat outside, drank our coffee, and watched the birds in and around the bayou. Mister laid out with us too, where he found a nice sunbeam to stretch out in.

About 1:30 I headed over to a client’s house to drop off a flash drive with the data that I pulled off an HD that I took out of an old computer that had died.

I got back to the rig about 3:30 just in time to turn right back around to take Jan up to the Cheesecake Factory at Baybrook Mall. She was having her yearly get-together with some of her coworkers from the last hospital she worked at before she retired and we hit the road the beginning of 2008.

I dropped her off at about 4, but the dinner wasn’t until 5:30. She got there early so she could get in line for a table for a group of six. They were already on a wait at 4pm so she just had to get in line since they don’t take reservations. But since she had her Kindle with her, she was just fine waiting.

After I dropped her off, I headed over to our storeroom to drop off the floor dolly that I used to work on our washer/dryer, and then picked up Chris’ mechanic’s creeper so I could use it to work under the rig.

My next stop was at the house so I could kill some time while I was waiting for Jan. They were having such a good time that she didn’t call me to pick her up until about 8. I think it was too many Long Island Iced Teas.

Heading home, we gave her friend Barb a ride to her home down in League City. In one of those ‘small world’ moments, Barb said her brother was an RV’er, and she was telling him that she had some friends(us) who were RV’ers too, and that we had a blog where we chronicled our travels.

He said a while back he had picked up a newspaper about RV’ing and started reading the guy’s blog, and this led him to other RV blogs.

Barb said her friends had spent last summer oil rig gate guarding in South Texas. He said one of the blogs he read had done that. In comparing notes, they figured out it was us!

Her brother sounded really impressed and told Barb, “I can’t believe you know Greg and Jan”.

Jan didn’t get your name, so if you’re Barb’s brother, leave us a comment and let us know.

Finally, wrapping things up for today, a 5 year old Pennsylvania girl laughingly told a friend at a bus stop she was going to shoot her with her soap bubble gun. Check it below:

Let’s Ban Imaginary Hello Kitty Soap Bubble Guns!

An adult overheard the “threat” and the 5 year old ended up being searched, interrogated by school officials to the point of crying, and all without her parents present. Later a teacher scolded her in front of the class and told her the police might come after her. Afterward she was suspended from kindergarten for 10 days for making “terroristic threats”

She now had a lawyer to help her.

Don’t you feel safer now?


January 19, 2014

It’s Alive !!!

Jan and I headed out a little after 10 AM to meet our friends Bob and Maria at the IHOP up in Kemah. Getting there at 10:30 we had hoped to avoid the usual Sunday morning rush, but that was not to be. We found a large crowd outside and a 30 minute wait inside. So after a few minutes, we decided to adjourn back down TX 146 to the breakfast buffet at La Brisa.

They do a great breakfast buffet with omelets, waffles, tamales, enchiladas, bacon, sausage, barbacoa, biscuits, fresh fruit, fruit juices, coffee, etc., and more. A really good meal. And for only $11, too.

We laughed and talked for almost two hours before we finally said our goodbyes and headed home.

First thing we did was to let Mister out on his leash. He loves this weather and likes to spend the whole day outside. One of his favorite places is this tub that has some old coats in it.

Mister in Tub

Most of the time he follows the sun as it moves over the coach. I think he would stay out all night if we would let him.

The laptop with the Conduit Search problem has now been completely resurrected. After removing the malicious software I was left with a machine that still would not connect to the Internet, at least through Internet Explorer or Google Chrome. Windows Mail however could still send and receive email.

Sometimes fixing these things is just a matter of not giving up, just slogging away and trying one thing after the other. And finally, something worked.

Then once I had this problem fixed, I was able to finish cleaning out the gunk and updating everything. I’m sure Tricia will be glad to get her laptop back tomorrow.

And I’ll be glad to see it go.


January 19, 2015

Well, it’s finally fixed . . . .

After two days, and three hours on the phone with Godaddy, and 28 emails back and forth to Indonesia, I (we) finally figured out what the website problem was. And as is usual in these things, it was something very simple

One folder full of files, buried inside of a bunch of other folders, did not have the correct permissions set. The folder was apparently ‘glitched’ somehow, so that you could write a file into that folder, but you could not then later delete that file.

Normally if you have write permission in a folder, you also have delete permission. But this folder was broken. So we ended up copying all the files out of it into a new folder, deleting the old one, and then renaming the new one to the correct name. And that fixed it.

After that was done, I called Moen about my continuing kitchen faucet problem. And they once again stepped up and are sending me an entirely new spray nozzle. This should fix the problem since there’s nothing left to replace. And according to the tracking number they sent me, the part shipped out today.

I spent the afternoon working on a few other projects, before our friend Randy came by and picked us up about 5:30 and we headed up to La Grange to the Fayette County Country Music Opry. Randy had seen a flyer about it at the park office and was going, so we tagged along.

This Opry is held on the 3rd Monday of every month at the local Knights of Columbus Hall, which from the size of it could fit just about everyone in La Grange.

Fayette County Opry 1
They had chairs set out for about 500, and as you can see, it didn’t come close to filling the place up. And there was even more room behind me.

The show starts at 7:30 but they open the doors at 5:30. One reason for this is that they have hamburgers and drinks available and a lot of tables set up around the sides, so people show up early and sit around to eat and talk. Which is what we did.

And as you can see, the place was pretty full by the time they started.

Fayette County Opry 4

The show kicked off right on time, with a couple of numbers from the band, before they brought out Keith Magel, known as The Texas Piano Man. We had seen Keith several times in the past at the Alvin Opry, so it was good to see a familiar face.

Keith Magel

Keith puts on a funny show with a lot of Floyd Cramer, Jerry Lee Lewis, and many others, and with a lot of honky-tonk and boogie-woogie piano thrown in.

The show format is very similar to the Alvin Opry, with the performers doing 3 or 4 songs for the first set and then an intermission. Then on the second set, everyone does 2 or 3 numbers, with everything wrapping up about 10pm.

The second performer up on stage was a real show stopper, 17 year old Sierra Cecil.

Sierra Cecil 3

And man, what a voice. One of her idols is Patsy Cline, who had a 4 octave vocal range. An online article about Sierra said she can match that note for note.

Sierra Cecil 1

And based on one song she sang, Blue Bayou, I can believe it.

When Jan and I hear someone singing Blue Bayou, we always compare them to Linda Ronstadt’s version with the high note at the end.

Sierra Cecil 2

But when Sierra started off, and not knowing then about her range, I thought she was too low to be able to hit it. But after the first verse, she jumped an octave and kept on going up, and then nailed the high note at the end.

WOW!

The next performer was also new to us, Pat Schlesinger.

Pat Schlesinger

Pat, who does Western Swing, also put on a very good show, with a lot of humor, and is another one who can really belt out a tune.

One thing I found interesting is that the soundman sits in the audience and runs the soundboard from his iPad. I wish I could have gotten a look at his setup.

The show wrapped up about 10pm, and we got home a little after 10:30, after a very nice time. Hopefully we’ll be able to do it again some time.

Tomorrow is our last day here, and as it stands now, we’ll head back over to Lake Conroe on Wednesday. But maybe we’ll get a last-minute reprieve from Galveston Bay RV Resort.


January 19, 2016

One Out Of Two . . .

With the beautiful weather this morning, it was perfect to walk, and also perfect to try out my new toy, an armband holder for my Galaxy S5 phone, that I got right before we left Colorado River on Sunday,
Phone Armband_thumb[3]

Armband for OtterBox Galaxy S6, Galaxy S5, Note 3 and others

Since I use the Runkeeper app to track our walks, I normally hold it in my hand, but that gets old after a while. So I got one of these.

One thing to be aware of, besides getting one that fits your phone, is to get one that will fit your phone if you use a case, like the Otterbox that I have. Otherwise, you’ll have to remove it from the case every time you want to use the armband.

I did have to map us a new route here at Conroe, since we’re walking further now, but using Google Maps Satellite View, it was no problem. Like in Colorado River, I found a split route that would allow us to take a break and have our coffee and breakfast bread partway through.

Our first part was the complete outside loop of the park, which covered 1.01 miles, leaving us back at the rig for a 20 minute or so break for breakfast, before heading back out again. This time we walked a new route for us here, a loop down to the marina area and back. Then once there, we sat at the waterside for a few minutes, enjoying the view out over the lake.

Lake Conroe Marina 3_thumb[1]

This photo looks back over the new Reserve area, where they’re selling modular homes, starting from $70,000.

Lake Conroe Marina 2_thumb[1]

Finishing our walk, we did 1.65 miles, up from our previous 1.52 miles. And even better we dropped our minutes per mile down to 25:45, a new best.

Getting back to the rig, we sat outside for a while, just enjoying the sun. But once inside it was back to work, with my first task to remove the cracked hinge from the rig screen door that I removed yesterday. Turned out to be a pretty quick job, just loosening six bolts with my socket set, and it was done.

Once I got it off and turned it over, it was easy to see the whole problem. The hinge is cracked in two places.

Rig Screen Door Hinge 1_thumb[1]

But on the plus side, both cracks are on welded edges, which hopefully means that it can be re-welded if necessary.

So my next thing was to call Colaw RV Salvage in Missouri to see if they have any replacement hinges. And after I finally got through to the right person, I was told that they didn’t sell the hinges separately, but only attached to the door.

Well, if it wasn’t too expensive, I guess I could use a new screen door too. But I quickly found out that he wasn’t talking about just the screen door, but the entire RV door assembly, i.e. the outside main door, the screen door, and the complete door jam and frame.

Rut Roh!

Knowing this wasn’t gonna happen, out of curiosity I asked what the cost of an entire door assembly was.

$350 and up!  Yikes!

As I said, not gonna happen.

So now it was on to Plan B, getting the hinge bent back into shape and re-welded. Now to find a welder here in the Conroe area.

And finding one out on the west side of Conroe, I decided to combine a visit with dinner at Vernon’s Kuntry Katfish, a favorite local place of ours. We had planned on stopping by the welding place on the way, but it turned out that this welding place was a commercial dealer, specializing in welding pipelines and oilfield equipment. Well, one out of two . . .

So it was on down the road a little bit to Vernon’s. We both ordered the 3 piece Katfish Dinner (FWIW we got 4 pieces each) and sides. Jan got hers with a side salad, and a loaded baked potato, and I got mine with the standard fries, pinto beans and Cole slaw.

While you’re waiting on your meal, they bring out a plate of hushpuppies and really good pickled tomatoes as an appetizer.

Vernon's Katfish 1_thumb[1]

And when your meal comes out, it’s just as good. The catfish is tender and flakey, with a crunchy, flavorful crust.

Vernon's Katfish 2_thumb[1]

Really good, and we’ll go back. Soon, I hope.

One other thing that came in with my phone armband was my new Square reader. You’ve probably seen the Square credit card reader used in many small business, connected to a smartphone or tablet.

I use mine when I’m working with computer clients who wish to pay by credit card. So I always have on in my truck just in case. But this new one is an upgrade.

Square Reader_thumb[2]

It allows me to accept the new, soon-to-be-mandatory ‘Chip’ cards, as well the even newer wireless pay methods, like Apple Pay, Samsung Pay, and several others.

So now I guess I’m ready until they come out with something new.


January 19, 2017

No Reprieve . . .

from the Governor. (Or Todd, anyway)

So as of right now (1:30pm) we’re still going into tonight’s gate, even now when they’re shutting down.

First up, a couple of corrections.

The photo of the waterbuck on last night’s blog was NOT taken by me. I just grabbed one from the Internet. I did try to get a shot with my phone, but the waterbuck passed me like I was standing still and was gone before I could get a shot. So all I got was a blurry picture with nothing in focus.

Waterbuck can run over 40 mph while vehicles are limited to 15 mph on that road, so it was gone in a flash. The only reason I even knew it was a waterbuck was the distinctive white ring on its rear end.

Second, a few days ago when I was talking about the new Scan & Go app for Wal-Mart, I said the only store it in use now was in Rogers, AZ. Blog reader Cathie Laurent corrected me saying it was probably Rogers, AR, which makes more sense. Thanks, Cathie.

Our lunch meal at Bella Sera was just as delicious as usual. Jan had her favorite Chicken Florentine,

Bella Sera Chicken Florentine

while got mine, the Bella Sera Chicken with ripe olives, capers, and sundried tomatoes.

Bella Sera  Bella Sera Chicken

Plus of course their really great homemade bread knots.

We’ll miss Bella Sera no matter when we leave.

The pad gate where I work has a resident raccoon living in the area. I first saw him walking behind the potty trailers this past weekend. Then a couple of nights ago, he strolled right by my truck at the pad entrance, seeming to not pay any attention to all the bright lights and noise going on around him.

Since my window was down and he was only about 15 feet away, I called out, “Hey Raccoon, where ya going?” He stopped, stood up on his hind legs with his front paws together and just stared at me for about 30 seconds, and then continued on his way out the gate, having no problem with the cattle guard.

As of right now, the rain is supposed to be gone for now, so we can only hope.

Muddy Truck Mat

I don’t think my truck floorboard and mat will ever be the same.


January 19, 2018

A Dry Day . . .

Not outside. It pretty much rained all day. Not very heavy, but a pretty steady drizzle.

No, the problem was my client’s office was dry. As in no water. Apparently a pipe that was weakened during the freeze waited until early this morning to let go. And with all the recent pipe problems, they can’t get a plumber out until something this weekend.

As soon as I got home about 4:30 Jan and I turned right back around and headed back up to Clear Lake to once again have dinner at Floyd’s Cajun Seafood. In fact we think Floyd’s might become our standard Friday night fare.

It’s that good.

Jan again had the Grilled Catfish with the Steamed/Grilled Mix Veggies

Floyd's Grilled Catfish

while I had the Shrimp Gumbo and a side salad.

Floyd's Gumbo

Before heading back to the rig, we made a run by Sam’s Club to pick up a couple of prescriptions. Although mine was correctly priced at $10, Jan’s should-also-be-$10 one came through at $93.23. Ouch.

Both my prescription and Jan’s one for Sumatriptan (Jan’s migraine medicine)  are on Sam’s Extra Value Drug List which with our Plus Card membership gives us access to over 600 prescriptions at either $4 or $10. And these are not the same ones that Wal-Mat discounts, but more expensive ones.

Anyway, it seems like about half the time they neglect to price the drugs against the Plus card. So I called them this afternoon so they could get it straightened out before I picked them up this evening.

Not sure what’s on the agenda for the weekend yet, but probably shopping and eating is involved.


January 19, 2019

A Wild and Crazy Night . . .

Or Morning, Actually.

I knew there was a front coming through last night, what with the high on Friday at 72° and 53 forecast for today. But what was strange was that as the night went on, the temp went up, starting at about 64° around 6pm up to 69 when I went to bed around 11.

But by around 3am the temps plummeted and the wind picked up. And by ‘picked up’, my LaCrosse Weather Station showed gusts in excess of 40mph. The rig was rocking and rolling, and the window awning on Jan’s side of the bed came unhooked and rolled up with a loud bang.

Karma got so upset that she abandoned the bottom of the bed and was huddling in the bathroom. The wind gusts meant that the accompanying rain was slashing against the RV, making even more noise. But by about 5am it had all settled down to a dull roar. And temps in the low 40’s.

When I went outside this morning, it was because the DirecTV was down, and this is what I saw first

January 2019 Windstorm 1

And as I suspected, this was the problem with our Winegard Traveler Dome.

January 2019 Windstorm 2

Luckily, after setting it back upright and rebooting it, the system came right back up. The last time this happened was in October 2015 when we were gate guarding, and there was a cow was involved.

CowSat

Tomorrow we’re heading up to the Sugarland area to watch Landon play hockey and then have lunch at the nearby Floyd’s Cajun BBQ.

Landon Hockey 2019

Looking forward to both.


January 19, 2020

A Really, Really Good Movie . . .

Jan and I headed up to Webster about 3:15 for our 3:55 showing of Knives Out, starring Daniel Craig, Christopher Plummer, Jamie Lee Curtis, Don Johnson, and Chris Evans.

We had already reserved our seats online so we were able to just walk in, show the QR code on my phone and go right to our assigned seats. Well, after a stop at the snack bar for popcorn, of  course.

In fact, since we started to smell the popcorn when we were still about 50 feet outside the building, I’m pretty sure that they have fans blowing the popcorn smell out into the parking lot.

Knives Out is a murder mystery with Daniel Craig, a private detective, trying to discover which family member killed Harlan Thromby, a very rich murder mystery writer and the scion of the Thromby clan. You know from fairly early on who killed Harlan. Or at least you think you do.

There are a lot of twists and turns in this tale, and you don’t really know what’s going on until the very end of the movie, and you’re happy to see the rest of this back-stabbing family get their comeuppance.

But the real standout here is Daniel Craig, just off his last  (so he says) James Bond 007 outing. As Benoit Blanc, he spouts a very authentic-sounding Kentucky drawl. And they’re already talking about making another movie with this character. So maybe Craig has his next movie series.

I won’t tell you anymore. Go see it for yourself.

Getting out about 6:30 we drove over to the new Los Ramirez Mexican Restaurant that finally opened up here.

Los Ramirez Webster

We probably won’t eat here very often since we have our local one so much closer, but we wanted to give it a try anyway. And although they were very busy and it took a little longer to get our food than our local one, it was just as good.


January 19, 2021

Pumpkin Praline . . .

After a delicious lunch at Dickinson Seafood of their Blackened Catfish and Grilled Shrimp,

Dickinson Seafood Catfish 20201020

Jan and I headed on up I-45 for a prescription and a few other things at WalMart, and then right across the street to Sam’s Club for another prescription.

Then it was back down to Santa Fe for lottery tickets and Cold Sugar-Free Pumpkin Praline Blended Coffees at Cowboy Coffee.

Cowboy Coffee 2

It’s really great to find out that they’re doing so well that they’re trying to hire more people so they can stay open longer every day.

Getting home we had a little time to sit outside of the patio a bit and listen to the wind chimes while we finished our coffees.

Very nice!


January 19, 2023

Upscale . . .

Originally we had planned to have lunch at Gator’s this afternoon, for the Thursday special, Fried Catfish. But in a last minute change, Jan decided she wanted to have lunch at Kelley’s Country Cookin’ in Alvin once again, so we could also check out the new pOpshelf location nearby.

Jan got the Stuffed Chicken Breast, which comes with 3 sides.

Kelley's Stuffed Chicken Breast

And Jan likes their Broccoli & Cheese Casserole so much she got 2 of them.

They do breakfast all day so I got the Chili & Eggs with Grits.

Kelley's Chili & Eggs

Both really good, so I think Kelley’s is back on our list again. In fact, we’ve scheduled our Alvin Opry group get-together there next month.

Next up was to check out the nearby pOpshelf.

Basically pOpshelf is a very upscale Dollar General, and in fact is owned by them.

pOpshelf Alvin

It seems to be their answer to Five BEL°W.

Funny thing about Five BEL°W is, that until we visited one last year, I always they were a dress shop for size 5 and below women’s clothes.

pOpshelf has a much lighter, open look than a typical Dollar General,

pOpshelf Interior

with most items between $3-$5, though I saw a couple of electronic items priced as much as $12.

The biggest difference between pOpshelf and DG is that, except for snack stuff, they don’t carry any food items.

Jan found a number of things she liked, and I found a couple too.

We both agreed we like pOpshelf better than Five BEL°W, and that we’ll be back. And it doesn’t hurt that it’s right down the road from Kelley’s either.

Check it out!

Finally coming home, we made a quick HEB stop for a few things before getting back to the rig about 3:45.

A very nice day, once again.

 

 

 

 

More Temu Stuff . . .

Today was our monthly get-together up in Conroe with Deb and Ed Hurlburt. We were hoping Janice and Dave Evans would be able to join us, but it was not to be.

We were meeting at the Golden Corral, one of our favorite restaurants in that area.

Somehow Ed got edged out of the photo.

We really like this GC, everything is always fresh, hot, and plentiful.

Our favorite TriFecta.

Next month is going to be El Palenque Mexico.

I think I’ve decided to just replace my Shurflo Water Pump with the new one, rather than just replace the pressure switch, since the pump has to be pulled out either way. Then I’ll replace the pressure switch on the old one, so I’ll have a spare.

Maybe this weekend. We’ll see.


Back in June, I gave you this warning about TEMU.

By now probably most of you have seen the myriad of ads/commercials for Temu, showing all the cheap stuff they have.

I didn’t install the app just on general principles, like it’s pretty much owned by the Communist Chinese government.

And it seems to be a big security risk as well.

Check out what Tech Guru Kim Komando has to say about it.

Kim Komando On Temu

From the article:

What you need to know before using Temu

First, you’re buying goods directly from manufacturers in China and other parts of the world. That’s why shipping times are often much longer than on sites like Amazon. You might get your stuff in a week, but it could be more like 12 days.

For the most part, the prices are low because the goods are cheap. The pictures of what you see advertised may not be what you actually get.

Temu collects, among other things:

  • The info you provide, like your name, address, and phone number.
  • Details you enter, like your birthday, photo, and social media profiles.
  • Your phone or computer’s operating system and version, IP address, GPS location (if you allowed it), and browsing data.
  • They also gather more about you from third party sources, including Temu sellers, public records, social media, data brokers, credit bureaus, and marketing partners.

    Let’s be safe out there.


But now there’s more. And this time it’s from Time, magazine, that is.

The Truth About Temu, the Most Downloaded New App in America

One of the comments on Lukey’s post, however, was significantly less positive than the rest. Julie Roper Malloy wrote that the package she ordered from Temu containing Christmas gifts never arrived, despite the company’s pledge it would be delivered Dec. 19 at the latest. “Still waiting for my order from November! Thanks Temu, you’ve ruined Christmas!” she wrote.

In a series of Facebook messages with TIME, Roper Malloy says she spent $178 on gifts from Temu for her family, including two drones and some makeup for her daughter. But the items never arrived. Roper Malloy says she has contacted the company several times for a refund, which has also yet to arrive. “I will definitely be more diligent in the future when ordering online,” she wrote. [Update: After this article’s publication, Roper Malloy received her Temu orders and a refund from the company.]

Roper Malloy is not the only one to encounter problems with a Temu order. Temu itself acknowledges that its orders take longer to arrive than those from Amazon—typically 7-15 business days—as they come from “overseas warehouses.” But it appears that Temu also has had trouble delivering inside that larger time window. In October, the Boston branch of the Better Business Bureau opened up a file on Temu and has received 31 complaints about the website.

Temu currently has a C rating on the BBB, and an average customer rating of 1.4 stars out of 5, albeit from only 20 reviews. (Complaints are separate from reviews, which do not factor into BBB’s official rating.) McGovern at the BBB says it’s unusual for such a new company to receive so many complaints in such a short amount of time. She notes that Temu has acknowledged and responded to every complaint posted to the BBB website, but many of those complaints remain unresolved.

Caveat Emptor!


Thought For The Day:

Arguing with your wife can be like getting arrested. Everything you say can and will be used against you.

And Now On To Today’s Retro-Blogs.™


January 18, 2011

Bingo and Turkey Vultures . . .

Well, today was supposed to be nice, perfect for working outside on rig stuff. But, once again…

They lied!

It was really overcast when I got up, but after a while, I decided to give it a try.

And, of course, as soon as I got set up and started working on installing the new wheel well flanges, it started raining.

Of course it did.

About 1:30 I headed up to Clear Lake to check in on a client that was having some problems. Then after about an hour getting him fixed up, I drove over to my doctor’s office to see about coming in early to my blood work done, before my appointment next Tuesday. So now I have an appointment to go by this Thursday to get that taken care of.

Getting back to the rig a little after 4, Jan and I headed right back out to pick up our granddaughter Piper for Bingo.

As regular readers know, Miss Piper had two wisdom teeth out last Friday and she’s still a bit under the weather, but well enough to play Bingo.

We met our friends Bob and Maria at Garcia’s Grill in Dickinson for supper, and then Jan, Piper, and Maria headed out to play Bingo.

In the meantime, I dropped Bob off at his house and then I headed up to Clear Lake to a client’s office to install the new 2011 UPS Worldship Shipping software.

And, lo and behold, the install went smoothly with no glitches. Very unusual, believe me.

I picked Jan and Piper up about 10:15, and was greeted with the news that the only person that won anything was Maria, and she was one of 13 winners of a $100 pot.

So after taxes, she got a little over $5.  Bummer.

After dropping Miss Piper off, we got back to the rig about 11:00.

Hopefully tomorrow’s weather will be better. At least they say it will. But then they said that today, too.

On a different note, Jan and I have been noticing all the “buzzards” flying around FM517 about half a mile east of I-45.

Late in the afternoon you can see hundreds of them circling overhead, and then they roost the surrounding pine trees. Soon it looks like the trees are decorated with large black ornaments.

A little research told me that there’s really no such animal as a buzzard. It’s kind of a generic name for vultures, and even some hawks and other raptors.

A little more Googling told me that these are Turkey Vultures.

TurkeyVulture

The main difference between Turkey Vultures and Black Vultures is the Turkey Vulture has a red head, and the Black Vulture has a grey head.

BlackVulture

It’s hard to tell from the last picture of two vultures sitting in the tree, but their heads are red.

Turkey Vultures 4

Turkey Vultures 3

Turkey Vultures 2

Turkey Vultures 1

I haven’t been able to find anything about why they roost in that area. It’s right along a 4 lane street and next to a city park. I can’t imagine there are a lot of dead bodies in the area.

At least I hope not.


January 18, 2012

Chicken Fajitas and Fry’s . . .

Today was pretty straightforward, with not a lot really happening.

After doing some stuff around the rig, I headed out about 1pm up toward Clear Lake. My first stop was Fry’s Electronics where I was looking for some check printing software.

My client’s website takes checks online and uses the software to print out a check using the customer-supplied routing and account numbers. My client then deposits the check in his bank just like a regular check.

But since we upgraded his main machine to Win 7, the old DOS-based check printing program will no longer run, so I’m looking for a new program for him.

After finding something I hope will work, I drove over to my client’s for the afternoon.

But, by the time the afternoon was over, we had decided to replace the ornery computer with a new Win 7 model, thus taking care of all of our networking problems.

Works for me.

I headed home about 4:30, and then turned around and Jan and I headed up the road to La Brisa for a great dinner. Jan had the Chicken-Stuffed Avocado with Chicken Fajitas and a couple of Shrimp Brochettes, while I had a Trio Combo, with Beef Fajitas, Chicken Fajitas, and Ribs. As delicious as usual.


January 18, 2014

Bins and Booze . . .

Our beautiful weather here on Dickinson Bayou continues with highs in the 60’s and lows in the 40’s. And even better, the long range 10 day forecast shows pretty much more of the same. Yay!

A knock at the rig door this morning introduced me to Lloyd Jackson, a blog reader who’s staying down the road at Green Caye RV Park, and wanted to introduce himself and inquire about my upcoming windshield replacement since he needs to replace his too. Lloyd reads our blog so he’s pretty much up on everything. It’s always fun to meet our readers as we travel around the country.

Later I spent some more time going through some of the rig bays, sorting stuff out. I’ve finally decided what I want to about the stuff stored in the back of the truck.

Rather than store stuff either loose or in a couple of large bins, I’m going to get a number of these plastic file boxes.

File Box

These will allow me to sort things into labeled boxes so I won’t lose things like before. Yeah, right.

About 4:15 Jan and I headed up to Webster where I dropped her off at Carrabba’s Italian Grill about 5. Jan was there for her yearly get-together with her former hospital coworkers. They’ve all gotten together like this every year since we started RV’ing in 2008.

They had their usual great time, until a lady sitting behind Jan slung her glass of wine over Jan and a couple of the other ladies. Without even much of apology either. When I picked her up about 8, I told her she smelled like she had a really good time.

While she was partying, I grabbed a couple of steak fajita tacos from Taco Cabana before heading over to a client’s office to work on their Point of Sale Cash Register System. They had been having a problem with one of their remote units and I figured that the problem might have been caused when they changed to a new Internet provider who also changed some things on their internal network.

As it turned out I was right, and I got things reconfigured and back up and running pretty quickly. Then I spent the rest of the time updating the machines and cleaning out the gunk.

And with her usual perfect timing, Jan called to be picked up just as I finishing up.

Tomorrow morning Jan and I are going to get together with our long-time friends, Bobby and Maria, for breakfast at the IHOP up in Kemah. We’re really looking forward to it.


January 18, 2015

Gosh Darn It . . .

Another beautiful day today, sunny with a high of 69, and a low of 39 tonight. Pretty much perfect weather for us.

I spent most of the early afternoon working on a website problem with Godaddy and the maker of a software package I’m using, going back and forth between the two, trying to figure out why I’m getting an error message instead of being redirected to the Thank You page.

Part of the problem is the time lag going back and forth between the two. But we’ll get it fixed eventually.

While I was waiting to hear back from anybody, I got back working on installing the new Moen kitchen faucet hose that just came in yesterday. It actually turned out to be pretty easy since the connection under the sink was a quick-disconnect. It was the ‘getting’ under the sink part that was the problem.

But I got it hooked up and then tested it. And Gosh Darn It (insert your own words here) the new hose leaks exactly like the old one did.

At the faucet end of the hose there is a ball-joint where the hose screws into the spray nozzle. Water is leaking from out around the ball-joint in the connector.

Moen Faucet Hose Joint

So I guess the trouble must be with the spray nozzle, but I sure can’t see any problem with it. The screw ring tightens down on the threaded end of the nozzle just fine. So it’s back on the phone to Moen tomorrow.

About 4:30 Jan and I drove around the circle, picked up our friend Randy at his RV, and then headed up to La Grange to introduce him to Sealand Seafood. You wouldn’t think that a place like this would have great seafood, but it does.

And lucky for us, Randy agreed.

Jan and I had our usual 2 Fish, 6 Shrimp, 6 Oysters platter, while Randy had the Blacken Tilapia with Crawfish Etouffee. Ours was as delicious as usual, and Randy said his was the best he’d ever eaten. And the servings were big enough that we all had leftovers for another meal.

It looks like things are maybe getting closer with Galveston Bay RV Resort. They posted a photo this afternoon and said the new sites were very close to being done.

Galveston Bay 20150117

Hope so. It would be really nice if when we leave here Wednesday morning, we could go down to Galveston Bay, instead of back to the Conroe Thousand Trails.


January 18, 2016

When One Door Closes . . .

Jan felt kind of ‘blah’ this morning so we didn’t walk. But she did fix us great breakfast sandwiches, using the biscuits and the leftover omelet from yesterday’s breakfast at Schobels in Columbus.

Jan's Breakfast Sandwich_thumb[1]

Toasted up in the oven, it’s made for a very tasty breakfast.

After a lot of computer stuff, I took a look at my screen door problem. I had planned to remove the door and store it in the back of the truck, but that didn’t work out. Due to the fact that the door is almost 7 feet tall. It sure didn’t look that tall, but a measuring tape told the tale. It wouldn’t fit.

But I still wanted to take it off to look at the hinges, even if temporarily.

Screen Door Removal 1_thumb[1]

I sprayed the 4 screws with WD-40 and let it penetrate for a while. After about 30 minutes I used my large #3 Phillips head bit and long extension to get the screws loose.

Screen Door Removal 2_thumb[1]

Using a small hammer, I tapped the driver bit a few times in each screw. This did two things, it helps break the screws loose, and it sets the bit into the softer screw metal, making it grab better and not wallow out. And it worked. When I used my ratchet with the extension and driver bit, the screws broke loose with a snap and came right off.

About this time our friend Rudy Legett called and said he was in the area, and wanted to come by and say ‘Hi’. We last saw Rudy and his wife Carolyn last July up in Fort Smith, AR while we were heading back to North Alabama after our two month sojourn in Prescott, AZ for our blow-out repair. Rudy and his wife were heading north for the summer and our paths crossed for a couple of days.

We were staying at the Springhill COE park, and they ended up parked right across from us. We first met Rudy and his wife several years ago when we were staying down in the Dickinson area, and went out to lunch with them.  So it was good to get back together for dinner here too.

Rudy is an Aqua-Hot technician, and services their hydronic systems that act as both a water heater and heater for your coach. A really nice system.

After Rudy left, I took a quick look at another door problem that I’ve had. When the rig is up on the levelers, the door is torqued slightly, and it’s sometimes difficult to get the door to lock correctly.

Door Lock 1_thumb[1]

What I found is that the latch just barely clears the bottom of the hole, keeping the bar from engaging and locking the door. So I thought for a few minutes and decided the quickest way to fix the problem was just to ‘brute force’ it.

So breaking out my recip saw, and chucking a metal blade, I cut a couple of notches in the bottom and ended up with this.

Door Lock 2_thumb[1]

Now the door locks just fine, with no binding. I’ll dig out a file tomorrow and even out the cuts, to neaten it up. But for now the problem is fixed.

Tomorrow it’s back to the screen door.

About 4pm Jan and I drove into Conroe to have dinner at Raising Cane’s Chicken Fingers, a chain that we first encountered in the Bryan/College Station area in 2014 when we were gate guarding about 20 miles east of there.

Cane's Chicken Fingers_thumb[1]

We’ve also eaten at several of them on the road, and this one in Conroe. It’s a simple menu, with only chicken fingers, fries, Cole slaw, and Texas toast.

But simple is good, especially when you do it right. And they do.

Really good.

Coming home, Jan wanted something sweet, so we stopped at a nearby Panera Bread where Jan picked out a Chocolate-filled Croissant and I got a Cranberry Orange Muffin. Both really good several hours later for a late-night snack.

The weather should be nice tomorrow morning so maybe we’ll be able to get a walk in. I’ve mapped out a new route for here at Lake Conroe since we’re walking further now since we were here two weeks ago.

But we’ll see how it goes.


January 18, 2017

Rigging Down?

We still don’t know exactly when yet, but they’re supposed to start wrapping this part of the pre-frack up tonight or tomorrow.

Maybe. You never know when they’ll break something, and then it’ll be a couple of extra days. But hey, more money for us.

This will probably be an even shorter blog than the recent short ones, since I’m typing it on the laptop sitting in the truck on the pad. So we’ll see how long the battery lasts.

Although we like the money with both of us working, this 2- 1/2 hour round trip out here from Kenedy is really eating into our sleep time. So before the actual frack starts in the next week or so, we’re definitely moving over here to Westhoff from Kenedy. This will make our commute time less than 10 minutes each way. That will be much nicer.

The only downside is that Jan and I will be working opposite shifts at the same gate, so the whole ‘two ships passing in the night’ thing. But it will only be for a couple of weeks or so before we leave here for the year on the 15th of February.

This morning on the way home a little after 5am, we stopped at The Donut Palace in Yorktown, one of a number in the area. Seems like every little town has one. Picked up hot, fresh breakfast kolaches for the trip home, and a couple of donuts for later. Plus a couple of breakfast biscuits for tonight’s dinner on the gate. All still warm from the oven.

Delicious.

After getting about 5 hours sleep we were up and out the door. Jan had prescriptions to pick up at Wal-Mart, and we wanted to have what might be our last meal at Bella Sera. Then after getting gas (driving 100 miles a day eats it up) we were back at the rig for about an hour nap before heading back out about 3:30pm.

After dropping Jan off at the front gate and driving into the pad which is almost 5 miles further in, I caught with a Waterbuck antelope just running down the side of the road along the fence line.

Waterbuck

Waterbucks are always easy to identify by the white ring on their rear ends.

Asking around, I found out there are a whole lot of game animals around here, zebras, other antelopes, and more.


January 18, 2018

I Depend On The Kindness Of Strangers . . .

We only got down to about 30° last night, much better than yesterday’s 23. And it finally made it into the 40’s today.

And as of yesterday, there was snow on the ground in all 50 states.

Jan continues to feel good, with absolutely no pain whatsoever as a result of her lithotripsy. Hopefully that will continue. Now she just needs to get all her stamina back.

About 3pm I went outside and reconnected us to shore water. Even though it had been in the 40’s for a while I still had icicles hanging off the rig. I also turned off the heat lamp but left it in the bay since we almost certainly have more cold weather to come.

I finally got tired of cleaning calcium buildup and debris out of the flow restrictor in our Oxygenics shower head.

Oxygenics Shower Head

This low pressure problem was recently aggravated by using the rig water system for the last couple of days, so I took care of the problem permanently. I took my drill and drilled the offending disk out.

Oxygenics Restrictor

No more problems now and the water pressure is great.

This year’s flu is looking worse and worse, especially since this year’s vaccine is said to be only about 10% effective against the N3N2 version that’s causing all the problems. However some authorities say it might be effective as much as 30% of the time. And it MIGHT make the symptoms of the other flus less. Oh Boy!

I have not had a flu shot since 1965-66, and I don’t plan to ever have another one. Jan got them regularly when she was working at area hospitals (it was required), and occasionally since then.

When Jan was in the hospital recently, her doctor asked me if she had had a flu shot this year and I said No. So he ask if she wanted to get one while she was in the hospital and I again said No, especially since it wasn’t very effective this year,

He nodded his head and said that he was hearing that from a lot of people this year.

In fact I’ve only had two flu shots in my life, the one in the winter of 65-66 and the winter before, in 64-65. And the reason I had those two was that I didn’t have choice either. I was attending Columbia Military Academy and it was required.

After the first one I was so sick that I missed classes for four days. But the next year I didn’t fare nearly as well. I was in the hospital for almost two weeks. And based on that history the doctor told me that if I ever got another one it might possibly kill me.

So you tell me, would you take that chance?

So as I tell everyone, I depend on the kindness of strangers. If EVERYONE else gets vaccinated like they’re supposed to, then I won’t have to worry about the flu because there will be no one for me to catch it from.

So you all know what you have to do.


January 18, 2019

Jan’s A Happy Camper . . .

We arrived at the Alvin office of Jan’s ophthalmologist about 7:15am for her 7:35 checkup on yesterday’s cataract surgery.

Only to find the parking lot empty and the office dark. Which was completely unlike her last visit the day after the surgery on her left eye, when the parking lot was more than half full and the place was bustling.

But at 7:30 people pulled into the parking lot and the lights came on.

The doctor checking her was someone we hadn’t seen before, but we both really liked him. He said Jan was doing fine, and to come back in a week for another checkup. Then in a month, she’ll come back for her final visit and her new eyeglass prescription. At that point she should be done and done.

For her part Jan’s much happier with the short-term results on her right eye than her left one. She says that right off the bat she’s seeing much better with her right eye than she did after a week or so after her left one. The doctor said that this is not unusual at all.

Jan got a pair of readers a week or so, and so far, they’re working great for her, letting her read her Kindles, laptop, and the desktop.

Last Sunday I crawled under the rig to take another look at my oil leak problem. I had planned to use my Wyze camera on the end of a rod to get a look. But, like when I tried this same thing from under the bed, I just couldn’t get it into position.

But I could get my cellphone up in there and got this.

Rig Oil Leak Cell Phone Photo 1

That’s the oil filter on the right and the coolant filter on the left. The long hose on the right side is the slobber tube. The small metal tube in the center seems to be part of the coolant system.

Rig Oil Leak Cell Phone Photo 2

Rig Oil Leak Cell Phone Photo 3

What you can’t see in the photos is that everything right above this area is tan-colored and dry. So I guess my next move is to drop the filter myself and see what I can see. I wish I could come up with some sort of plug to cap off the filter location and then run the engine for a while to see what happens.

Just a reminder to any new readers. The filter gasket has already been changed out without fixing the problem. But I’ll keep after it.


January 18, 2020

Bits And Pieces, Odds And Ends . . .

I recently came across a couple of new cables for charging all the many devices we seemed to have accumulated, one very useful and the other one just neat.

We have a couple of devices that stay plugged in and charging pretty much 100% of the time, which of course is not good for the batteries.

One of them is our Verizon MiFi which runs all our many WiFi-controlled devices here in the coach, from our Wyze security cameras to our SmartBot coffee pot controller, and the number of WiFi switches we have. So it needs to stay plugged in all the time

The other one is Jan’s Samsung Galaxy S5 phone. It’s mainly used so that I can call Jan when I’m at work or out and about. Otherwise it just sits on the counter. And if it gets unplugged after it’s 100% charged, it often gets forgotten until it runs down and shuts off.

I’ve tried using timers to shut them off on a schedule, but they always seem to still get overcharged, or they run down. But then I came across these cables.

Auto Off Cables

Cable Auto Disconnect Smart Charging Male to Male USB C Cable

They charge the device up to 100% and then shut off until the charge drops to about 90% and then turn back on. Lather, Rinse, Repeat.

The other cables are just neat, and very colorful.

Light Up Charge Cables

Light Up Charging Cables

This evening I went online and reserved seats for Knives Out at the theater up in Webster for tomorrow afternoon. Using Flixster on my phone, I was able to reserve our seats and pay for them through the app.

This is the same theater where we saw Downton Abbey a few months ago, and it has the new very comfortable recliners.

cinemark_luxurylounger

Movie Recliners

So comfortable, in fact, that you have to be careful not to fall asleep. Or at least Jan does.

Though I guess it depends on the movie. A few years ago we somehow ended up taking Landon to see the SpongeBob Square Pants movie and all 3 of us fell asleep. And that was without recliners.

At the time Jan and I both agreed that that was an hour and 40 minutes we would never get back.

And we still haven’t.


January 18, 2022

So Now It’s Jan’s Turn . . .

We had planned to meet friends Debi and Ed Hurlburt and Janice and Dave Evans at the Olive Garden up in Spring. But last night it was Jan’s turn to start feeling under the weather, with a bad headache and an upset tummy. All that continued into this morning, so unfortunately we had to cancel. But she was starting to feel a little better by this evening.

Now back to our weekend Kingsland trip.

We left the rig about 8:30 with our first stop about an hour away at the  Buc-ee’s in Katy for Kolaches and coffee. And since their gas was pretty cheap, I topped off the Jeep before we left. And when we did, Jan took over the driving for a while.

Heading out I-10 we got onto US71 at Columbus. Then after a quick bathroom stop at Hruska’s, we got on US77 at La Grange and took it all the way up to Giddings. The only hitch was a 15 minute holdup because construction had made a bridge a one lane crossing.

Getting into Giddings, we made another Buc-ee’s stop where I noticed this sign.

Buc-ee's Hiring

Wow! Three weeks vacation the first year, healthcare, and a 401K. They are really looking to hire.

Then with me driving again, we got on US290 taking us into and through Austin and out on SR29 over to Burnet, and then down US281 to our Motel 6 in Marble Falls, getting in about 2:30.

A nice, easy trip.

Since Brandi had to wait for Lowell to get off work, they wouldn’t get into Marble Falls until about 8:30, so they told us to go ahead and have dinner with Chris and Linda without them.

So we ended up at Alfredo’s about 5pm.

Jan had a really good Chile Relleno Platter,

Kingsland Alfredo's Jan Chile Rellano

while I got, well, I forget what it was called, but it was really good too.

Kingsland Alfredo's Greg

Finally, it was back to the motel for the night, looking forward to seeing everyone tomorrow.