Daily Archives: September 10, 2015

It’s Frack Eve . . .

Or so we’re told.

They said they’ll start tomorrow, but we’ll see. They’ve already prepositioned 20 loads of sand, so when the next sand trucks start coming in, we’ll know they’re off and running.

And on a good note, we’ve been told that they will only be bringing in 20 sand trucks a day, ten at a time. Last year it was not unusual to get 20 an HOUR. And not for just one hour either. But hour after hour. So this is really good news.

From yesterday’s 64 vehicles coming in, today it jumped to 135. But a lot of that was fracking equipment coming in to stay, so it may settle down a bit once they actually get started. One of the things that will tend to keep the count up is that there’s no housing here, so the crews all come and go at the shift changes.

We saw a familiar face today when our Gate Guard Services guy came by to top us off with diesel and change the oil and filter in the generator. It was Todd, who’s just come back to work with GGS a few days ago. Todd has been one of our services guys several times over the last few years, and in fact he was the one that brought in our replacements when we left our gate in North Zulch last November.

Good to have him back.

This is what I have on the thermostat back in the bedroom.

Thermostat Wiring

The switch I added let’s me manually change the fan speed from high to low. Normally this is down automatically, with the fan running on high on AC, and low when you’re set to heat.

But right after we bought the coach, I replaced the old round analog thermostats with these digital ones, which have worked great for the last 8 years. I put in the switch because Jan was worried about how loud the AC fan would be since it was located right over our bed. But as it turns out, it wasn’t a problem, and it just stays on high.

But I now want to add the same mod to the front thermostat. Our new Coleman 15K AC unit has a much stronger (and louder) fan so I would like decrease the noise a bit when we’re both watching TV. Plus with the increased BTU’s of the new unit, coupled with the better fan, the unit really doesn’t run as long as it should.

You’ve probably heard that having too big an AC unit in a house not a good idea. The reason for this is that in high humidity areas, like Texas, cooling is only part of what makes you comfortable. You also need to remove the moisture from the air. This is why you see water running down the side of your rig in humid areas.

Earlier this summer when we were in Prescott, AZ, the AC would run, but there was no water coming off the roof, because we only had about 10% humidity. But in Texas it’s a different story.

So when your AC system is too big, it cools down the air so fast, that it doesn’t run long enough to take the necessary moisture out. This means that you can end up with that cold. clammy feeling. So by being able to manually adjust the fan speed, I can reduce the cooling and increase the moisture removal.

Tomorrow’s grocery day for me, and then Jan’s once again talking about going into Carthage to get her hair done. But we’ll see.

____________________________________________________

Thought for the Day:

“The more you sweat in peace, the less you bleed in war” – General Norman Schwartzkopf

asdfasdfsd