Our RV Adventures

Since I spent all evening remoting in trying (and finally suceeding) to fix a problem at work so I wouldn’t have to drive up to Clear Lake, you get repost of our visit to Crater Lake in June of 2013.

Hard to believe it’s been 6 years.

Note that in June the place was still covered in snow.

Jan having gotten up earlier as usual, this morning started at 8:30 for me, since we were leaving at 9 for our daytrip down to Crater Lake National Park.

But our first stop was at the park entrance at Big Jim’s Coffee Wagon, a coffee and pastry kiosk that’s open everyday from 6:30 to 10:30 am, and gets a lot of business from outside the RV park, as well as park residents. Jan had a Hazelnut Hot Chocolate and a breakfast sandwich, and I had a Snickerdoodle Latte and a bagel w/cream cheese. Both very, very good. We’ll go back.

Then we were on the road heading about 100 miles south to Lobert Junction where we would pick up SR 62.

Along the way, we saw Mt. Scott which is right next to Crater Lake, and blocks it from our view.

Right before we turned onto SR 62 we stopped for gas and a pitstop at the Crater Lake Junction Truck Stop, and then it was back on the road for the 35 mile trip up into the park.

We started out about 4000 feet, and by 4500 feet we were seeing snow.

And more snow at 5000 feet

And even more at 6000 feet.

Then we see this.  Oh, Boy!

But finally at about 7200 feet we pulled into Rim Village, and seeing a lot of people on top of a hill taking pictures, we decided to join them.

And this is what we saw! Be sure and click on this panoramic photo to see it full size. Be sure and use the slider bar at the bottom to see it all.

If ever a view was breathtaking.

Crater Lake is 6 miles across and 1949 feet deep, and from where we were standing on the rim, it’s 900 feet to the water.

This ‘lump’ is Wizard Island, formed from lava eruptions after the volcano Mount Mazama exploded in 5700 B.C., and then collapsed into the crater we have today.

Here’s an Internet photo showing it from a better angle.

And this Internet aerial view gives a better perspective of the entire crater.

The water in the crater, formed from snow melt over thousands of years, is some of the purest in the world, and really acts like a mirror.

Since it still goes down into the low 20’s here at night, you can see a sheen of ice around the edges of the lake.

And here’s my Sweetie, showing up the view.

While we were at Rim Village we checked out the gift shop and café. The first thing we notice were these ‘snow tunnel’ entrances leading out to the street.

And it’s really a long hallway leading into the building. It turns out that these are done this way so you can get into the building when there is 30 to 40 feet of snow covering up everything. Crater Lake gets a average of 44 feet (FEET!) of snow a year, and this way the snow plows can clear the entrance right along the edge of the road, so you can get inside the building.

Even the outside restrooms are done the same way.

A little after 1pm we drove about half a mile along the rim to the Crater Lake Lodge to have lunch.

Originally built somewhat shoddily in 1915, it had deteriorated to such an extent that in 1989 it was condemned, torn down, and rebuilt from scratch, with only the Great Hall being saved. And they did a beautiful job.

Jan and I had great Reuben Sandwiches in the dining room,

and then went outside to take in another great view of the lake from the lodge porch.

We even had a Steller’s Jay taking in the view with us.

All during the day, we kept bumping into this group of motorcyclists, who asked me to take their picture with their camera. So the last time I saw them I took a picture with mine.

If it had been a little later in the year, we could have taken the 31 mile loop drive around the crater. And we could have also come in the north entrance and saved ourselves about 100 miles. But the loop is still snowed in.

It takes 10 men working for 4 months starting in April to clear the loop. They can do about 1/4 mile a day to clear 30 feet of snow from a roadway 30 feet wide. That means they’re moving over 1 million cubic feet of snow a day. That’s over 25 million pounds. A DAY!

After getting our National Park Passport stamped, we headed back toward home, after having a great day.And then to top it off, after coming through the tiny town of Fort Klamath on SR62, we had probably our last view of Mt. Shasta, about 90 miles away. What a sight!

We got home about 6 pm, after a 9 hour trip of about 275 miles. A long, but really nice day.

Tomorrow, who knows?

But I know I’m sleeping later.

Not much of a blog today, because I spent most of the day at Lowe’s and Home Depot.

When I got up about 7am and walk out of the bedroom, my feet went squish squish on the carpet. The area at the bottom of the bed was soaked. So after I fed a very demanding cat, I got my flashlight and went to look for the problem. And since this had happened before back in 2015, that’s where I started.

And it was the same fitting that was leaking last time.

Last time I disconnected the fitting and wrapped it with Teflon tape and tightened it down. And the leak was gone. But 4 years later, it was back.

But when I tried to tighten it some more I could feel the connector was cracked inside, and it started leaking a little more. At this point I slipped on some pants and went outside to turn off the park water. Coming back in, I opened the bathroom faucet to bleed off the water pressure.

During one trip to Lowe’s and two to Home Depot, trying different ideas to make a new connection without using the PEX tubing/connectors that required a special tool and crimps.

Finally I found some flexible vinyl tubing of the right size, capable of 225psi @ 150° so it should handle the water pressure and temps of the shower. So then I used 2 of these PEX connectors,

the tubing, and a couple of clamps to make up a new flexible connection, rather than the old rigid one.

Hooking it up, I turned on the RV water pump for a couple of minutes. And I did have a small leak on the upper connector, but after tightening it a couple of more turns took care of that.

I will leave the shore water off for a couple of days, using the rig water pump so it starts leaking in the middle of the night, I won’t have to get dressed to go outside and turn it off.

Thought for the Day: 

Rules of Marketing:  A very satisfied customer will tell 14 people, but a dissatisfied customer will tell 80.

gk